Faro FOCUS3D X 130 User Manual page 145

® 3D
FARO Laser Scanner Focus X 130 Manual
January 2014
Focus X 130 Repair Fee Schedule
3D
(Out of Maintenance/Warranty Owners Only!)
System Testing and Evaluation Fee - Contact your local FARO
Service Center for pricing.
A fee is charged for any system testing and evaluation. This includes
system diagnosis, calibration and/or recertification, and applies to all
3D
Focus X 130s. However, this fee does not include disassembly/repair
costs if required. An estimated cost for disassembly/repair will be given
to the customer prior to the repair. The disassembly/repair charges must
be paid in full prior to the actual disassembly/repair. However, if no
repairs are needed the fee will be applied to the cost of system testing
and evaluation. All evaluations contain a recertification. Re-certification
will be performed on an "as needed" basis.
Contact your local FARO Service Center for the current system testing
and evaluation fee pricing.
Repair Times
Calibration and/or Recertification Only - Can take up to 14 days to
complete.
Disassembly and Repair - Can take up to 60 days to complete. This
time is dependent on the supply of purchased components.
*Includes Calibration and Recertification
15