Power Management - Faro FOCUS3D X 130 User Manual

® 3D
FARO Laser Scanner Focus X 130 Manual
January 2014

Power Management

(Home > Manage > General Settings > Power Management)
Figure 6-19 Power Management
Screensaver - If the screen has not been touched for a certain period of time, a
screensaver appears on the screen. Change the length of time before the
screensaver appears by pressing the plus or minus buttons. Deactivate the
screensaver by setting the time to „never". When the screensaver is visible,
simply touch the screen to return into operation mode.
Dim display during scanning - If switched on, the brightness of the screen will
be decreased during scanning to save battery power. Switching this option to ON
is particularly useful for long lasting scans.
Start on Power - Enable to allow the scanner to be turned on (if it was turned
off) by connecting it to the external power supply. This option is useful, for
example, for automation applications.
Power supply info - Informs about the current power supply and the exact
charge state of the battery.
82
3D
Chapter 6: The Focus X 130 Controller Software