Setting Up The Tripod - Faro FOCUS3D X 130 User Manual

position until it snaps into place. Make sure that the battery's pins are in contact
with the charger's terminals.
4 Charging starts automatically as soon as the battery has been inserted into the
charger; LEDs 2 to 5 blink and illuminate according to the current charging
state of the battery. For more information, see "PowerDock Battery Charging
Cradle" on page 24.
5 After charging, carefully slide the battery out of position and remove it.

Setting up the Tripod

Extend and lock all legs of the tripod. Check that the tripod adjustment
arrangements have been locked and that the legs are of even length. Ensure that
the surface is stable, that the tripod feet are secured and that it is firm in its
position. The tripod's plate should be levelled as horizontally as possible.
FARO
Figure 5-2 Placing the Battery on the PowerDock
®
Laser Scanner Focus
29
Chapter 5: Getting Started
3D
X 130 Manual
January 2014