®
FARO
Laser Scanner Focus
January 2014
historical buildings). Compared to even weighted metering, this mode will
increase scan duration by approximately 14 seconds.
Advanced Settings
(Home > Parameters > Advanced Settings)
Clear Contour - Enables the dynamic contour filter. While scanning, this
hardware filter will remove incorrect measurements at the edges of objects. It
removes scan points resulting from hitting two objects with the laser spot which
mainly happens at the edges of objects.
Chapter 5: Getting Started
3D
X 130 Manual
Figure 5-26 Zenith weighted metering
Figure 5-27 Advanced Scanning Settings
50