®
3D
FARO
Laser Scanner Focus
X 130 Manual
January 2014
Selecting an Operator
Figure 6-16 Operators List
Select an operator in the list by touching the corresponding button. The selected
operator will be highlighted, marked with a check mark and assigned to the next
captured scans until another operator is selected. To view or edit the details of the
selected operator, touch its button once again.
General Settings
(Home > Manage > General Settings)
Figure 6-17 General Settings
Sounds - Change the volume of the scanner sounds, enable or disable scanner
sounds. See "Sounds" on page 79.
79
3D
Chapter 6: The Focus
X 130 Controller Software