Extron electronics VNR 100 User Manual page 23

6. From the menu bar on the desktop, select
Applications > Internet > Firefox Web
.
Browser
7. In the browser address bar, enter the IP address of
the recorder followed by a colon and the port number
( ). The login page opens (see the
127.0.0.1:8080
figure to the right).
8. Enter the and
Username
NOTE: By default, the
are both .
config
9.
Click . The VNR 100 Recorder Settings
Login
page opens (see the figure to the right).
10. Set the Network Settings and Recorder Settings
as required (default values are shown).
11. Click .
Apply Changes
12. of the config screen.
Logout
13. Power down the unit.
14. Remove the mouse, keyboard, and monitor.
.
Password
and
Username Password
IP Address
Subnet Mask
Gateway
Serial
Controller IP
Controller port
MTU
New password
Confirm New password
Umount
Disk free space:
Format
VNR 100 • Replacing the VNR 100 Drives
Logout
VNMatrix recorder settings
Network settings [eth0]
192.168.254.254
255.255.255.0
192.168.254.253
Recorder settings
1111999
192.168.254.254
5432
1500
User settings
Data disk
mounted to /home/matrix_rec/Recording_Files
status:
19GB->98% used
formated to ext3
Apply Changes Cancel Changes
17