Replacing The Vnr 100 Drives; Os Drive Replacement Kit; Replacing The Os Drive - Extron electronics VNR 100 User Manual

Replacing the
VNR 100 Drives
There are two optional drive replacement kits for the Extron VNR 100:
•
•
The drives allow the recorder to be moved between secure areas without compromising
confidential data. The media drive kit also offers a convenient way to archive materials.
There are four drive bays on the front panel of the VNR 100. From left to right, they are
numbered 0 - 3. The OS drive is number 0 and the media drive is number 1.
OS Drive (drive #0)
Figure 15. Media Drive and OS Drive

OS Drive Replacement Kit

Replacing the OS Drive

ATTENTION:
ATTENTION:
NOTES:
OS Drive Replacement Kit
Media Drive Replacement Kit
Media Drive (drive #1)
Do not remove the OS or Media drive when the VNR 100 is powered on.
Ne retirez pas le driver OS ou multimédia lorsque le VNR 100 est
branché.
• The replacement drive does not have a default IP address assigned. This must be
set by the user.
•
The OS drive is licensed to run only on the VNR 100 for which it was supplied and
cannot be used with any other VNR 100 unit.
• A label fixed to the top of the drive shows the serial number of the VNR 100 for
which it is intended to be used.
C
VNR 100 • Replacing the VNR 100 Drives
B A
15