Recording File Directory Nomenclature - Extron electronics VNR 100 User Manual

Recording File Directory Nomenclature

The flag must be followed by the directory path that contains the recording that is being
-i
exported.
A typical path may look like:
/home/matrix_rec/Recording_Files/Mission1/OTW_5400036.0.0_r0_s0.rec
where:
/home/matrix_rec/Recording_Files/
are stored.
Mission1/
contain recordings from multiple VN-Matrix recorders.
OTW_5400036.0.0_r0_s0.rec
encoded stream, recorded from one VN-Matrix encoder. The name reflects whether the
folder holds a recorded video, audio, data, or whiteboard stream. The individual naming
elements have the following significance:
Naming element Explanation
Refers to the name assigned to the VN-Matrix encoder at the time of the recording.
OTW
Refers to the serial number of the VN-Matrix encoder.
_5400036
This digit refers to the type of recorded content. The options are:
.0
•
0
•
A0
•
D0
•
W0
Indicates the stream type:
.0
•
0
•
1
Indicates the recording channel:
_r0
Video Streams
•
r0
Indicates the recording number. This value increases incrementally if a subsequent
_s0
recording with the same name is made.
is a user-created subdirectory for housing a recording session. This session may
is the directory that holds the recording files for a single
— video
— audio
— data
— whiteboard.
— RTP stream
— TCP stream
— video recording channel 1
is the factory default path, where recording files
Audio Streams
• — audio recording channel 1
r1
VNR 100 • Reference Information 32