Gcode Frame Translator Utility Instructions; Introduction; Overview - Extron electronics VNR 100 User Manual

gcode Frame Translator Utility Instructions

Introduction

The VN-Recorder Frame Translator utility described in this section allows the conversion
of existing VN-Matrix video recordings to individual still frames. These frames can be
assembled into standard video, HD video, or other types of media files using third-party
editing applications.
The utility also allows audio files to be converted to .WAV format.
NOTE: The information in this document is accurate for VNR 100 devices running
This section provides information on:
•
•
•
•
•
•
•
•

Overview

To create a media file from a VN-Matrix recording:
1.
2.
3.
4.
5.
The main focus of this section is step 3, the
firmware version 9.2.1 or later.
Overview
Preparation for Using the gcode Frame Translator Utility
Description of the Frame Translator Utility
Recording File Directory Nomenclature
Frame Translation Procedure
Example Strings
Advanced Use
Working with Video and Audio Streams
Use VN-Matrix encoders and recorders to create a VN-Matrix recording.
Create a directory on the VN-Matrix recorder, where the still frames and audio file will be
stored (see Recording File Directory Nomenclature
Use the Frame Translator Utility to export the video recordings as still frames to the
directory created in step 2. If required, use the utility to export audio recordings as WAV
files to the same directory (see
Transfer the still frames and audio files to a PC running a third-party editing application.
Create a video or media file from the still frames and audio file.
on page 32).
Frame Translation Procedure
Frame Translation Procedure
VNR 100 • Reference Information
on page 33).
on page 33.
28