Vnr 100 Drives; Application Diagram - Extron electronics VNR 100 User Manual

The VNR 100 recorder is fully compatible with existing VNM Matrix products, including the:
• Extron 5-channel VN-Matrix recorder
• Extron VN-Matrix 2
• Extron VN-Matrix software decoder
• Extron VN-Matrix Enterprise Controller
Extron VNS 104 Multi-Stream decoding software
•

VNR 100 Drives

The VNR 100 has two replaceable drives:
Operating system (OS) drive — contains the VNR 100 operating system.
•
• Media drive — contains the video, audio, data, and whiteboard information files that
have been recorded by the VNR 100.
Both these drives can be replaced easily. Replacing the media drive does not require any
device specific data to be updated on the OS drive. For complete instructions on replacing
the drives, see
(page 18).

Application Diagram

Browser Based User
Control
VNM Enterprise Controller
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
Multiple VNM 200 and 225 Series Encoders
(or CODECs configured as encoders)
Figure 1.
and 3 codecs
xx xx
OS Drive Replacement Kit
TouchLink ™ Touchpanel
External User Control
Network
Multicast Enabled
Network
Example of a System Using the Extron VNR 100
(page 15) and Media Drive Replacement Kit
VN-Matrix
VNR 100
Recorder
VNR 100 Recorder
VN-Matrix
VNR 100
Recorder
VNR 100 Recorder
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
Multiple VNM 200 and 225 Series Decoders
(or CODECs configured as decoders)
VNR 100 • Introduction 2