Extron electronics VNR 100 User Manual page 42

Example 3 — start decoding a file at a time other than the beginning of
the recording
The command is:
./gcode -g -s 17:45:37.53 -i /home/matrix_rec/Storage/SAC_Test/
Dave_Gilmour_Dimming_of_the_Day_620027.0.0_r0_s0.rec
• The file conversion starts ten seconds into the recording at
Example 4 — finish decoding a file at a time other than the end of the
recording
The command is:
./gcode -g -f 17:46:27.53 -i /home/matrix_rec/Storage/SAC_Test/
Dave_Gilmour_Dimming_of_the_Day_620027.0.0_r0_s0.rec
The file conversion finishes at
•
Example 5 — generating Targa files, specifying the output directory,
and the start and finish times.
The command is:
./gcode -t -o /home/matrix_rec/Targa -s 17:45:37.53
-f 17:46:27.53 -i /home/matrix_rec/Storage/SAC_Test/
Dave_Gilmour_Dimming_of_the_Day_620027.0.0_r0_s0.rec
• The output files are Targa (tga) files (
The output folder is
•
/home/matrix_rec/Targa
• The file conversion starts at
The finish time is
•
17:46:27.53
.
17:46:27.53
)
-t
.
17:45:37.53
.
VNR 100 • Reference Information
.
17:45:37.53
36