• Make sure the position of the Switch does not make the rack unstable or top-heavy. Take all
necessary precautions to anchor the rack securely before installing the unit.
2.3.2 Attaching the Mounting Brackets to the Switch
Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket
1
with the screw holes on the side of the Switch.
Figure 5 Attaching the Mounting Brackets
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes
2
into the Switch.
Repeat steps
3
You may now mount the Switch on a rack. Proceed to the next section.
4
2.3.3 Mounting the Switch on a Rack
Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
1
up the two screw holes on the bracket with the screw holes on the side of the rack.
GS2210 Series User's Guide
1
and
2
to install the second mounting bracket on the other side of the Switch.
Chapter 2 Hardware Installation and Connection
25