Vlan Details; Configure A Static Vlan - ZyXEL Communications GS2210 Series User Manual

Chapter 9 VLAN
Table 28 Advanced Application > VLAN: VLAN Status (continued)
LABEL
Status
Change Pages

9.2.1 VLAN Details

Use this screen to view detailed port settings and status of the VLAN group. Click on an index
number in the VLAN Status screen to display VLAN details.
Figure 64 Advanced Application > VLAN > VLAN Detail
The following table describes the labels in this screen.
Table 29 Advanced Application > VLAN > VLAN Detail
LABEL
VLAN Status
VID
Port Number
Elapsed Time
Status

9.3 Configure a Static VLAN

Use this screen to configure and view 802.1Q VLAN parameters for the Switch. To configure a static
VLAN, click Static VLAN in the VLAN Status screen to display the screen as shown next.
90
DESCRIPTION
This field shows how this VLAN was added to the Switch.
dynamic: using GVRP
static: added as a permanent entry
Click Previous or Next to show the previous/next screen if all status information cannot be
seen in one screen.
DESCRIPTION
Click this to go to the VLAN Status screen.
This is the VLAN identification number that was configured in the Static VLAN screen.
This column displays the ports that are participating in a VLAN. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked as "–".
This field shows how long it has been since a normal VLAN was registered or a static VLAN
was set up.
This field shows how this VLAN was added to the Switch.
Dynamic: using GVRP
Static: added as a permanent entry
GS2210 Series User's Guide