ZyXEL Communications GS2210 Series User Manual page 282

Chapter 34 DHCP
Figure 201 IP Application > DHCP > DHCPv6
The following table describes the labels in this screen.
Table 134 IP Application > DHCP > DHCPv6
LABEL
VID
Helper Address
Options
Interface ID
Remote ID
Add
Cancel
Clear
VID
Helper Address
Interface ID
Remote ID
Delete
Cancel
282
DESCRIPTION
Enter the ID number of the VLAN you want to configure here.
Enter the remote DHCPv6 server address for the specified VLAN.
Select this option to have the Switch add the interface-ID option in the DHCPv6 requests
from the clients in the specified VLAN before the Switch forwards them to a DHCPv6 server.
Enter a string of up to 64 printable characters to be carried in the remote-ID option. The
Switch adds the remote-ID option in the DHCPv6 requests from the clients in the specified
VLAN before the Switch forwards them to a DHCPv6 server.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to their last saved values.
Click Clear to reset the fields to the factory defaults.
This field displays the VLAN ID number. Click the VLAN ID to change the settings.
This field displays the IPv6 address of the remote DHCPv6 server for this VLAN.
This field displays whether the interface-ID option is added to DHCPv6 requests from clients
in this VLAN.
This field displays whether the remote-ID option is added to DHCPv6 requests from clients
in this VLAN.
Check the entry(ies) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to clear the selected checkbox(es) in the Delete column.
GS2210 Series User's Guide