Configure Vlan Port Settings - ZyXEL Communications GS2210 Series User Manual

Chapter 9 VLAN
Table 30 Advanced Application > VLAN > Static VLAN (continued)
LABEL
Add
Cancel
Clear
VID
Active
Name
Delete
Cancel

9.4 Configure VLAN Port Settings

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port.
Click the VLAN Port Setting link in the VLAN Status screen.
Figure 66 Advanced Application > VLAN > VLAN Port Setting
92
DESCRIPTION
Click Add to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to change the fields back to their last saved values.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
GS2210 Series User's Guide