Saving Your Configuration; Switch Lockout - ZyXEL Communications GS2210 Series User Manual

Figure 22 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back to
the run-time memory. Settings in the run-time memory are lost when the Switch's power is turned
off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch's storage that
remains even if the Switch's power is turned off.
Note: Use the Save link when you are done with a configuration session.

4.5 Switch Lockout

You could block yourself (and all others) from managing the Switch if you do one of the following:
Delete the management VLAN (default is VLAN 1).
1
Delete all port-based VLANs with the CPU port as a member. The "CPU port" is the management
2
port of the Switch.
Filter all traffic to the CPU port.
3
Disable all ports.
4
GS2210 Series User's Guide
Chapter 4 The Web Configurator
39