Figure 87 Advanced Application > Spanning Tree Protocol > MSTP
The following table describes the labels in this screen.
Table 45 Advanced Application > Spanning Tree Protocol > MSTP
LABEL
Port
Status
Active
GS2210 Series User's Guide
DESCRIPTION
Click Port to display the MSTP Port screen (see
Click Status to display the MSTP Status screen (see
Select this to activate MSTP on the Switch. Clear this to disable MSTP on the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
Chapter 13 Spanning Tree Protocol
Figure 88 on page
123).
Figure 89 on page
125).
121