Ipv6 Global Address Setup - ZyXEL Communications GS2210 Series User Manual

Table 22 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Link-Local Address Setup (continued)
LABEL
Apply
Cancel
Clear
Index
Interface
IPv6 Link-
Local Address
IPv6 Default
Gateway

8.10.6 IPv6 Global Address Setup

Use this screen to configure the interface's IPv6 global address. Click the link next to IPv6 Global
Address Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 57 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
The following table describes the labels in this screen.
Table 23 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
LABEL
Interface
IPv6 Global
Address
Prefix Length
EUI-64
Apply
Cancel
Clear
Index
GS2210 Series User's Guide
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the nonvolatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This is the static IPv6 link-local address for the interface.
This is the default gateway IPv6 address for the interface.
DESCRIPTION
Select the IPv6 interface you want to configure.
Manually configure a static IPv6 global address for the interface.
Specify an IPv6 prefix length that specifies how many most significant bits (start from the
left) in the address compose the network address.
Select this option to have the interface ID be generated automatically using the EUI-64
format.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the nonvolatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
Chapter 8 Basic Setting
81