ZyXEL Communications GS2210 Series User Manual page 273

Figure 192 IP Application > DHCP > DHCPv4 > Option 82 Profile
The following table describes the labels in this screen.
Table 129 IP Application > DHCP > DHCPv4 > Option 82 Profile
LABEL
Name
Circuit-ID
Enable
slot-port
vlan
hostname
string
Remote-ID
Enable
mac
string
GS2210 Series User's Guide
DESCRIPTION
Enter a descriptive name for the profile for identification purposes. You can use up to 32
ASCII characters. Spaces are allowed.
Use this section to configure the Circuit ID sub-option to include information that is specific
to the relay agent (the Switch).
Select this option to have the Switch add the Circuit ID sub-option to client DHCP requests
that it relays to a DHCP server.
Select this option to have the Switch add the number of port that the DHCP client is
connected to.
Select this option to have the Switch add the ID of VLAN which the port belongs to.
This is the system name you configure in the Basic Setting > General Setup screen.
Select this option for the Switch to add the system name to the client DHCP requests that it
relays to a DHCP server.
Enter a string of up to 64 ASCII characters that the Switch adds into the client DHCP
requests. Spaces are allowed.
Use this section to configure the Remote ID sub-option to include information that identifies
the relay agent (the Switch).
Select this option to have the Switch append the Remote ID sub-option to the option 82
field of DHCP requests.
Select this option to have the Switch add its MAC address to the client DHCP requests that
it relays to a DHCP server.
Enter a string of up to 64 ASCII characters for the remote ID information in this field.
Spaces are allowed.
Chapter 34 DHCP
273