ZyXEL Communications GS2210 Series User Manual page 61

Figure 42 Basic Setting > System Info (for PoE model(s) only)
The following table describes the labels in this screen.
Table 9 Basic Setting > System Info
LABEL
System Name
Product Model
ZyNOS F/W
Version
Ethernet
Address
CPU Utilization
Memory
Utilization
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
GS2210 Series User's Guide
DESCRIPTION
This field displays the descriptive name of the Switch for identification purposes.
This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
This field displays the version number of the Switch 's current firmware including the date
created.
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
CPU utilization quantifies how busy the system is. Current (%) displays the current
percentage of CPU utilization.
Memory Utilization shows much DRAM memory is available and in use.
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for those above.
Chapter 8 Basic Setting
61