Totals Menu - Cornelius VIPER 2 FLAVOR Service Manual

Totals Menu

© 2008-2012, IMI Cornelius Inc.
Display
This selection opens and closes the Liquid Line solenoid
LLS VALVE #1
and valve for barrel 1
BRL MOTOR #1 This selection turns the barrel 1 motor on and off
To move between one set of barrel parameters to the next, press the Right or Left
arrow keys. This moves the highlight to the first entry of the second barrel, etc.
The Totals menu (Figure 28) shows the cumulative run time of the system, a
component of the system or an error. Some individual items may be reset, where
available, by highlighting the item and pressing the RESET button. The RESET
button is only displayed for items that may be reset, such as hours since the motor
seal was changed or the number of compressor cycles. Pressing the BACK button
returns to the Choose menu and saves the changes. The description of each item
in the Totals list is shown in Table 25.
To move between one set of barrel parameters and the next, press the Right or
Left arrow keys. This highlights the first entry of the second barrel, etc.
POWER ON 00079:34
TOTALS
SLEEP 00034:21
SYSTEM ERROR 00003:45
COMP RUN #1 00006:53
12:51P
COMP CYCLES #1 0000012
MAR 04
BARREL REFG #1 00006:54
BACK
Display
POWER ON HHHHH:MM
SLEEP HHHHH:MM
SYSTEM ERROR HHHHH:MM
COMP RUN #1 HHHHH:MM
COMP CYCLES #1 ########
BARREL REFG #1 HHHHH:MM
MOTOR ON #1 HHHHH:MM
- 39 -
Table 24
Description
Figure 28. Totals Screen
Table 25
Value
Shows how long the machine has been
powered up
Shows how long the machine has been in
sleep mode
Shows how long the machine has had a sys-
tem error
Shows how long the compressor has been
running since the last reset
Shows the number of compressor cycles
since the last reset
Shows how long the barrel has been in
refrigeration mode
Shows how long the motor has been run-
ning on a specific barrel
Publication Number: 621260373SER
Viper Service Manual
Description