Setting The Clock - Cornelius VIPER 2 FLAVOR Service Manual

Viper Service Manual

Setting the Clock

Publication Number: 621260373SER
CLOCK
SETUP
12:51P
MAR 04
BACK CLOCK DST ‐ +
Button
BACK Returns the display to the Select menu
CLOCK Highlighted to indicate that the Clock menu is displayed
DST Opens the Daylight Savings Time menu
- Decrements the highlighted field
+ Increments the highlighted field
Select the CLOCK SETUP menu from the Select menu, shown in Figure 19. This
displays the Clock Setup menu, shown in Figure 20. To set the time, perform the
procedure in Table 11.
Step Action
1
Set clock time
2
Select hour field
3
Set correct hour
4
Select minute field
5
Set correct minute
6
Select AM/PM field
7
Set AM/PM
To set the date, perform the procedure in Table 12 and refer to Figure 20.
- 28 -
TIME: 11:00 AM
DATE: 01/01/00
Figure 20. Clock Setup Screen
Table 10
Description
Table 11
Use up and down arrows on the right side of the
control panel to highlight TIME display on screen.
Use the left and right arrows to select hour field
Use the + or - buttons at the bottom of the display
to set the proper hour.
Use the left and right arrows to select minute field.
Use the + or - buttons at the bottom of the display
to set the proper minute.
If the 12 hour clock option is selected, use the left
and right arrows to select the AM/PM field.
Use the + button at the bottom of the display to set
the AM/PM setting.
Procedure
© 2008-2012, IMI Cornelius Inc.