Adjusting And Securing The Back Angle; Multifunctional Seating Unit; Mygo Seating System; Securing The Product In The Vehicle - Otto Bock Kimba neo Instructions For Use Manual

Usage

6.10.6 Adjusting and securing the back angle

6.10.6.1 Multifunctional Seating Unit

Activating the Locking Mechanism
Before using the product in a wheelchair accessible vehicle, the back angle must be locked in the vertical position.
1) Turn the bottom rotary knob to the left and adjust the back angle to vertical (see Fig. 18; see Page 18).
2) Turn the bottom rotary knob approx. 5 mm further to the left in order to activate the back securing bolt.
3) Pull out the back securing bolt and turn it 90° (see Fig. 108). The protruding locking aids on the back securing
bolt (see Fig. 108, item 1) have to engage in the horizontal slotted holes (see Fig. 109, item 1).
4) Turn the bottom rotary knob to the right to secure the back angle.
Deactivating the Locking Mechanism
After use in a wheelchair accessible vehicle, the back securing bolt must be deactivated:
1) Turn the bottom rotary knob to the left until the back securing bolt is released.
2) Pull out the back securing bolt and turn it 90° (see Fig. 108). The protruding locking aids on the back securing
bolt must engage in the vertical slotted holes (see Fig. 109, item 2).
3) Turn the bottom rotary knob to the right to secure the back angle without the back securing bolt (see Fig. 18;
see Page 18).

6.10.6.2 Mygo Seating System

Before using the product in a wheelchair accessible vehicle, the back angle must be tilted back gently to an angle
of approx. 95°.
INFORMATION: Please note the information in the separate instructions for use provided for the seating
system.

6.10.7 Securing the Product in the Vehicle

INFORMATION
Please refer to the additional information in the brochure on using our products in wheelchair accessible vehicles,
order number 646D158.
46 | Ottobock
107
109
108
Kimba neo