Rain Cover; Summer/Winter Slip Sack - Otto Bock Kimba neo Instructions For Use Manual

Usage

6.8.10 Rain cover

NOTICE
Incorrect attachment
Damage to the product
► During the attachment, make sure that the product cannot grind against the wheels.
The rehab buggy can be equipped with a rain cover that prevents the user getting wet (see Fig. 75). The rain cover
can be stored in the side bag of the canopy (see Fig. 76).
Using the rain cover
1) Take the rain cover from the side bag of the canopy (see Fig. 76).
2) Put the rain cover over the canopy and the footrest. Make sure that the air intake is placed open over the user's
nose (see Fig. 75, item 1).

6.8.11 Summer/winter slip sack

NOTICE
Incorrect attachment
Damage to the product
► During the attachment, make sure that the product cannot grind against the wheels.
The rehab buggy can be equipped with a summer/winter slip sack (see Fig. 77). The warming winter part can be
inserted/removed using snap fasteners.
Fastening the slip sack
1) Place the slip sack in the rehab buggy.
2) If needed, place the lap belt (see Fig. 78, item 1), the abductor/five-point belt (see Fig. 78, item 2) or the groin
strap (see Fig. 78, item 3) through the openings underneath the slip sack.
3) Fasten the attachment cords (see Fig. 78, item 4) depending on the attachment situation:
→ Back: e.g., at the seat plate (see Fig. 79, item 1)
→ Front: e.g., at the footrest tube (see Fig. 79, item 2)
Using the slip sack
1) If needed: insert/remove winter part using snap fasteners.
2) Open the zipper and place the user inside.
3) Close the zipper and the closures.
36 | Ottobock
75 76
Kimba neo