Multifunctional Seating Unit (Standard Seat); Removing And Mounting The Seating Unit - Otto Bock Kimba neo Instructions For Use Manual

Usage
CAUTION
Lack of driving experience
Risk of tipping, falling
► Practise using the product on level, open ground first.
INFORMATION
Please also observe the safety instructions in the section "Safety" > "Safety Instructions for Use".
In the interest of user safety, the following inspection must be conducted prior to use:
1) Verify firm seating of the rear wheel.
2) Verify firm locking of the seat and back angle adjustment mechanism.
3) Verify the functionality of all belt buckles on the safety belts and/or positioning aids.

6.2 Multifunctional Seating Unit (Standard Seat)

INFORMATION
The product can also be equipped with alternative seating systems. In this case, please observe the information in
the separate instructions for use for the seating system.

6.2.1 Removing and mounting the seating unit

CAUTION
Incorrect mounting of the seating unit
Seat can become loose and cause the user to fall out
► When attaching the seating unit, make sure it clicks audibly onto the mobility base.
► Secure the seating unit using the seat lock.
To facilitate transportation of the rehab buggy in a passenger vehicle or to divide the weight into two units for lift­
ing, the seating unit can be easily detached from and reattached to the outdoor mobility base.
Detaching the seating unit
1) Slide the seat lock to the right to open it (see Fig. 11).
2) Stand next to the seating unit and hold the seat by the top of the backrest with one hand.
3) Pull the release lever located under the seat up to the edge of the seat (see Fig. 12).
→ The clutch will now release the seat adapter.
4) Tip the seat back at an angle of approx. 45° and then lift it up (see Fig. 8).
16 | Ottobock
11 12
Kimba neo