Before You Begin; How To Use These Operating Instructions; Screen Displays - Siemens HiPath AllServe Operating Instructions Manual

Before You Begin

These operating instructions describ e the op tiset E memory telephone on your HiPath
30 00/HiPath AllServe.
They describe all functions you can use from your telephone. You may find that some func-
tions you wish to use are not available on your telephone. This may be due to one of the
following reasons:
• The function has not been configured for your telephone - address any questions to
Customer Support.
• Your communications platform does not support this function - contact your Siemens
sales representative to upgrade your system.

How to Use these Operating Instructions

Step by step
Program/Service
Speaker
Start conference?
Display co ntrast?

Screen Displays

P lease dial
Return to held call?
2
You will find a graphic representation of the steps
in logical sequence in the left column. Below is an
explanation of the symbols:
Lift the handset (off-hook).
Replace the handset (on-hook).
Conduct a call.
Enter a telephone number or code.
Enter the code.
or Press volume controls on the telephone.
Press the key.
Press the illuminated key.
Press the flashing key.
The option appears on the screen.
Press the
Search for an option.
Press the
until the option appears on the screen.
Then press the
The first six lines display data from the telephone direc-
tory Æ page 61 or the caller list Æ page 38.
Line 7 displays prompts or acknowledgment messages,
d ep ending on the situation.
Line 8 displays functions that you can confirm by press-
>
ing . If the symbol ">" appears on the right, you
can press
key to confirm your selection.
keys,
key to confirm your selection.
to access further options.