Call Forwarding; Using Variable Call Forwarding - Siemens HiPath AllServe Operating Instructions Manual

Step by Step
Forwarding o n?
1=all calls?
2=external calls only?
3=in ternal calls on ly?
or
US: Save?
UK: Save en try?
Forwarding o ff?

Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 95!
Select and confirm.
or
Enter the code.
Select and confirm.
or
or
or
or Enter the code.
Enter the number of the telephone that is ringing .
Confirm.
Deactivating call forwarding:
Select and confirm.
or
Enter the code.
When call forwarding is active, a sp ecial dial tone
sounds when you lift the handset.
If DID DTMF is active (contact System Support),
you can also forward calls to this destination.
Destinations: fax = 870, DID = 871 ,
fax DID = 872.
Call Forwarding
65