Answering Calls With Trunk Keys; Making Calls With Trunk Keys; Using A Trunk Key To Place A Call On Hold And Retrieve It Again - Siemens HiPath AllServe Operating Instructions Manual

Step by Step
If necessary Press the rapidly flashing trunk key.
If necessary Press the free trunk key that you want to use to set up
If necessary
or
Release
Team and Executive/Secretary Functions With Trunk Keys

Answering Calls With Trunk Keys

Precondition: Your telephone is ringing and/or the
trunk key is flashing rapidly.
This is not necessary if the trunk is automatically as-
signed to you when you lift the handset or p ress the
"Speaker" key; in this case the assigned trunk key lights
up.
Lift the handset.
or
W ith on-hook dialing: Use speakerp hone mode.

Making Calls with Trunk Keys

your call.
This is not necessary if the trunk is automatically as-
signed to you when you lift the handset or p ress the
"Speaker" key; in this case the assigned trunk key lights
up.
Dial the station number.
When the other party answers, Lift the handset.
or
W ith on-hook dialing: Use speakerp hone mode.
Using a Trunk Key to Place a Call on Hold and
Retrieve It Again
Precondition: You are conducting a call over a trunk in
your group. The "US:Hold UK:Common Hold" key has
been programmed on your telephone Æ page 55.
Placing a call on hold:
Press the "US:Hold UK:Common Hold" key.
Replace the hand set or press the key.
Depending on the configuration (contact System Sup-
por t), this may be necessary so other team members
can also pick up the call on hold.
83