Switching Between Phone Calls On Multiple Trunks; Forwarding Calls On Lines - Siemens HiPath AllServe Operating Instructions Manual

Team and Executive/Secretary Functions With Trunk Keys
Step by Step
Program/Service
* 501=Forward Line: On ?
84
Retrieving the call:
Press the slowly flashing trunk key.
Switching Between Phone Calls on Multiple
Trunks
Precondition: You are conducting a call over a trunk in
your group. Another trunk key starts flashing.
Press the flashing trunk key. The first party is placed on
hold on the other trunk.
Press the slowly flashing trunk key. The second part y is
p laced on hold.
You can switch b etween the t wo call as many times as
you wish. Always press the slowly flashing trunk key.

Forwarding Calls on Lines

You can immediately forward internal or external calls
on your lines to different internal or external telephones
(destinations); even external destinations are possible
in cer tain system configurations.
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Press the trunk key you wish to use.
or
Enter the number of the trunk you wish to use.
or
If available. Press the "Forward Line" key.
(You have stored the incomplete "Forward Line" function
on the key, excluding the call forwarding type and desti-
nation Æ page 55.)