Leaving An Advisory Message; Deleting Advisory Messages; Using Another Telephone Like Your Own - Siemens HiPath AllServe Operating Instructions Manual

Step by Step
Advisory msg. on?
A B
0=Back at:
Advisory msg. off
Program/Service
*
508=Temporary Ph one?

Leaving an Advisory Message

You can leave an advisory message on your telephone
screen for internal callers who want to reach you while
you are away from your desk.
When another par ty calls you, the message appears on
the caller's screen.
Select and confirm.
or
Enter the code.
Enter the message, which can be a total of 24 charac-
C
ters long, from the keypad.
or
Select and confirm the preprogrammed message
(which can be changed by System Support).
or
... Enter the code directly.
The codes appear on the screen, next to the messages
to which they are assigned.
You can add numeric input to preprogrammed
messages that end in a colon.

Deleting Advisory Messages

Select and confirm.
or
Enter the code.
or
If you have programmed an "Advisory message" key
Æ page 55: The LED lights up. Press the key.
Using Another Telephone Like Your
Own
Other people can temporarily use your telephone for
outgoing calls as though it were their own.
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Using Other Functions
69