Assigning A Procedure (Operating Steps) To A Key - Siemens HiPath AllServe Operating Instructions Manual

Saving Station Numbers, Functions, Procedures and Appointments
Step by Step
Program/Service
*
91=Prog. feature key?
US: Change feature?
UK: Change key?
P ro cedure key?
Redial
US: Save en try?
UK: Save?
P reviou s?
58
Assigning a Procedure (Operating
Steps) to a Key
Station numb ers and functions which require additional
inp uts, i.e. comprise several operating steps, can be
saved to a single key on your telephone.
Using the associated dial function, for example
Æ page 31, you can save all the remaining inputs re-
quired (st ation number of the calling party + the station
number to b e dialed ) to a single key.
Station numbers which require additional inputs but
also dial pauses can also be stored.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
Press the key. If a function has already been assigned to
this key, a corresponding message is displayed.
Confirm.
Confirm.
Enter the procedure, e.g. "*67 231 089123456".
*67= code for associated dial
231= st ation number of the calling party
089123456 = number to be dialed.
If necessary
To insert pauses, press this key (a "P" is displayed).
Confirm.
or If you make a mistake:
Erase the entry character-by-character from right to left.
or
Select and confirm. This deletes all digits entered.