Accepting A Call From An Answering Machine - Siemens HiPath AllServe Operating Instructions Manual

Step by Step
Program/Service
* 89=Door opener on?
3=change passw ord?
1=en able with ring?
2=en able w/o ring?
Program/Service
#89=Doo r o pener off?
Opening the door with a code (at the door):
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed , a doorbell call sig-
nal may or may not be forwarded .
Activating the door opener:
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Dial the entrance telephone number.
Enter the five-d igit code. Default code = "0 0000".
or
Select the displayed function and press the "OK" dialog
key to change the code.
Select and confirm.
or
You can also open the door without a doorbell ring.
Deactivating the door opener:
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Accepting a Call From an Answering
Machine
You can accept a call from any answering machine if the
machine is connected to your system (cont act System
Support) and you have programmed the answering ma-
chine number on a key Æ page 55.
The LED lights up. Press the key.
Making and Answering Calls
23