Network Settings - Denwa Communications DW-610G User Manual

2.2.1

Network settings

Make sure that network is connected already before setting network of phone.
DW-610G uses DHCP to get WAN IP configurations, so phone could access to network
as long as there is DHCP server in it. If there is no DHCP server available, phone has
to be changed WAN network setting to Static IP or PPPoE.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press Menu->Settings->Advanced Setting, then enter passwords, and choose
network ->WAN->Net Mode, enter and choose PPPoE through navigation keys and
press the Save key.
3. Press Quit, then choose PPPoE Set, press Enter.
4. The screen will show the current information. Press Del to delete it, then input
your PPPoE user and password and press Save.
5. Press Quit six times to return to the idle screen.
6. Check the status. If the screen shows "Negotiating..." it shows that the phone is
trying to access to the PPPoE Server; if it shows an IP address, then the phone has
already get IP with PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network's parameters first, such as IP Address, Net mask,
Default Gateway and DNS server IP address. If you don't know this information,
please contact the service provider or technician of network.
2. Press Menu->Settings->Advanced Setting, then enter passwords, and choose
network ->WAN->Net Mode, enter and choose Static through navigation keys and
press the Save key
.
3. Press Quit, then choose Static Set, press Enter.
4. The screen will show the current information, and then press Del to delete. Input
your IP address, Mask, Gateway, DNS and press Save to save what you input.
5. Press Quit six times to return to the idle screen.
6. Check the status, the screen shows "Static" .the screen shows the IP address and
gateway which were set just now, if the phone could display the right time, it shows
that Static IP mode takes effect.
Setting DHCP mode
Press Menu->Settings->Advanced Setting, then enter passwords, and choose
1.
network ->WAN->Net Mode, enter and choose DHCP through navigation keys and
press the Save key
.
Press Quit six times to return to the idle screen.
2.