Denwa Communications DW-610G User Manual page 66

Enable Silent Enable Silent Mode by selecting it, the phone light will red blink to
Mode remind that there is a missed call instead of playing ring tone
Turn Off Enable Turn Off Power Light by selecting it
Power Light
Emergency Specify the Emergency Call Number. Despite the keyboard is
Call locked ,you can dial the emergency call number
Number
Enable Password Dial by selecting it, When number entered is
beginning with the password prefix, the following N numbers
Enable after the password prefix will be hidden as *, N stand for the value
Password Dial which you enter in the Password Length field. For example:
you set the password prefix is 3, enter the Password
Length is 2, then you enter the number 34567, it will display 3**67
on the phone
Password Dial Specify the prefix of the password call number
Prefix
Password Specify the Password length
Length
DND Return Specify DND Return code
Code
Busy Return Specify Busy Return Code
Code
Reject Return Specify Reject Return Code
Code
Hide DTMF Specify the hide DTMF mode
Push XML Specify the Push XML Server, when phone receives request, it
Server will determine whether to display corresponding content on the
phone which sent by the specified server or not.
Set Prefix in peer to peer IP call. For example: what you want to dial
P2P IP Prefix is 192.168.1.119, If you define P2P IP Prefix as 192.168.1., you dial
only #119 to reach 192.168.1.119. Default is ".". If there is no "."
Set, it means to disable dialing IP.
Active URI Specify the server IP that remote control phone for corresponding
Limit IP operation.
Enable Call Disdale this function ,you will not hear the tone "beep" when there
Waiting Tone have multiple incoming calls
Action URL
Settings
Specify the Action URL that Record the operation of phone, send
these corresponding information to server, url：
Action URL http://InternalServer /FileName.xml?（InternalServer is server ip，