Dw-610G's Advanced Function; Call Pickup; Join Call; Redial / Unredial - Denwa Communications DW-610G User Manual

4

DW-610G's advanced function

4.1

Call pickup

Call pickup is implemented by simulating pickup function of PBX. it's that, when A
calls B, B rings but no answer, at this moment, C can hook off and input an appointed
prefix plus B's number, pick up A's call and talk with A.
The following chart shows how to configure an appointed prefix in dial peer to have
call pick up function.
*1* means appointed prefix code. After making the above configuration, C can dial
*1* plus B's phone number to pick up A's call. User can set prefix in random, in the
case of no affecting current dialing rules.
4.2

Join call

When B is calling C, A can join in the existing call by inputting an appointed prefix
numbers plus B or C number, if B or C also supports join call.
The following chart shows how to configure an appointed prefix in dial peer to have
join call function.
*2* means appointed prefix code. After making the above configuration, A can dial
*2* plus B or C number to join B and C's call. User can set prefix in random, in the
case of no affecting current dialing rules.
4.3

Redial / Unredial

If B is in busy line when A calls B, A will get notice: busy, please hang up. If A want to
connect B as soon as B is in idle, he can use redial function at the moment and he can
dials an appointed prefix number plus B's number to realize redial function.
What is redial function? A can't not build a call with B when B is in busy, then A will
subscribe B's calling mode at 60 second intervals. Once B is available, A will get
reminder of rings to hook off, while A hooks off, A will call B automatically. If at this
time A is occupied temporarily and unwilling to contact B, A also can cancel the
redial function by dialing an appointed prefix plus B's number before making the
redial function.