Denwa Communications DW-610G User Manual page 80

Field name
Syslog Setting
Server Address
Server Port
MGR Log Level
SIP Log Level
IAX2 Log Level
Enable Syslog
Web Capture
Start
Stop
8.3.6.3 Config Setting
Field name
Save Configuration
Backup Configuration
Clear Configuration
Syslog Configuration
explanation
Set Syslog server IP address.
Set Syslog server port.
Set the level of MGR log.
Set the level of SIP log.
Set the level of IAX2 log.
Select it or not to enable or disable syslog.
Click the start button when you need capture the WAN
packet stream of the phone, then open or save the file as
the interface
Click the end button to stop capturing the packet stream
Config Setting
explanation
You can save all changes of configurations. Click the Save
button, all changes of configuration will be saved, and be
effective immediately.
Right clicks on "Right click here..." and select "Save Target
As config File(.txt)" then you will save the config file
in .txt format, or select "Save Target As config File(.xml)"
then you will save the config file in .xml format
User can restore factory default configuration and reboot
the phone.
If you login as Admin, the phone will reset all