Network Settings - Denwa Communications DW-310P User Manual

2.2.1 Network settings

Make sure that network is connected already before setting network of phone.
DW-310/DW-310P uses DHCP to get WAN IP configurations, so phone could
access to network as long as there is DHCP server in it. If there is no DHCP
server available, phone has to be changed WAN network setting to Static IP or
PPPoE.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and
choose network ->WAN settings->Connection Mode, enter and choose PPPoE
through navigation keys and press the Save key.
3. Press Back, then choose PPPoE Set, press Enter.
4. The screen will show the current information. Press Del to delete it, then
input your PPPoE user and password and press Save.
5. Press Back six times to return to the idle screen.
6. Check the status. If the screen shows "Negotiating..." it shows that the
phone is trying to access to the PPPoE Server; if it shows an IP address, then
the phone has already get IP with PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network's parameters first, such as IP Address, Net mask,
Default Gateway and DNS server IP address. If you don't know this
information, please contact the service provider or technician of network.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and
choose network ->WAN settings->Connection Mode, enter and choose Static
through navigation keys and press the Save key
3. Press Back, then choose Static Set, press Enter.
4. The screen will show the current information, and then press Del to delete.
Input your IP address, Mask, Gateway, DNS and press Save to save what you
input.
5. Press Back six times to return to the idle screen.
6. Check the status, the screen shows "Static" .the screen shows the IP
address and gateway which were set just now, if the phone could display the
right time, it shows that Static IP mode takes effect.
Setting DHCP mode
Press Menu->Settings->Advanced Settings, then enter passwords, and
1.
choose network ->WAN settings->Connection Mode, enter and choose DHCP
through navigation keys and press the Save key
.
.