Denwa Communications DW-610G User Manual page 62

Field name
First Codec
Second Codec
Third Codec
Fourth Codec
Fifth Codec
Sixth codec
Handset Input
Volume
G729AB Payload
Length
Onhook Time
Default Ring Type
Handset Output
Volume
Speakerphone
volume
Ring Volume
G722 Timestamps
G723.1 Bit Rate
Default Ring Type
DSP Configuration
explanation
The first preferential DSP
codec:G.711A/U,G.722,G.723,G.729,G.726-32
The second preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,NONE
The third preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32 ,NONE
The forth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32 ,NONE
The fifth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,NONE
The sixth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,NONE
Specify Input (MIC) Volume grade.；
Set G729 Payload Length
Specify the least reflection time of Hand down, the
default is 200ms.
Select Ring Type
Specify Output (receiver) Volume grade.
Specify Speakerphone Volume grade.
Specify Ring Volume grade
160/20ms or 320/20ms is available
5.3kb/s or 6.3kb/s is available
Set up the ring by default