Denwa Communications DW-610G User Manual page 40

8.3.2.2 LAN Config
Field name
IP Address
Subnet Mask
DHCP Service
NAT
Port Mirror
Enable Bridge Mode
Notice: When LAN IP or bridge mode status is changed, the system will reboot!
If you choose the bridge mode, the LAN configuration will be disabled.
8.3.2.3 Qos&VLAN Config
The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN
functionality can use different VLAN IDs by setting signal/voice VLAN and data VLAN.
The VLAN application of this phone is very flexible.
LAN Config
explanation
Specify LAN static IP.
Specify LAN Netmask.
Select the DHCP server of LAN port or not. After you
modify the LAN IP address, phone will amend and adjust
the DHCP Lease Table and save the result amended
automatically according to the IP address and Netmask.
You need reboot the phone and the DHCP server setting
will take effect.
Select NAT or not.
Select Port Mirror or not, it only works in bridge mode, the
function of the port mirror is that copy the data stream
from the WAN port to the LAN port of the phone.
Select Bridge Mode or not: If you select Bridge Mode, the
phone will no longer set IP address for LAN physical port，
LAN and WAN will join in the same network. Click "Apply",
the phone will reboot.