Denwa Communications DW-610G User Manual page 38

Active IP Address
Current Subnet Mask
MAC Address
Current IP Gateway
MAC Timestamp
Please select the proper network mode according to the network condition.
DW-610G provide three different network settings:
Static: If your ISP server provides you the static IP address, please select this

mode, then finish Static Mode setting. If you don't know about parameters of
Static Mode setting, please ask your ISP for them.
 DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
PPPoE: In this mode, you must input your ADSL account and password.

You can also refer to 2.2.1 Network setting to speed setting your network.
Obtain DNS server
automatically
If you use static mode, you need set it.
IP Address
WAN Config
The current IP address of the phone.
The current Netmask address.
The current MAC address of the phone.
The current Gateway IP address.
Shows the time of getting MAC address
Select it to use DHCP mode to get DNS address, if you
don't select it, you will use static DNS server. The default
is selecting it.
Input the IP address distributed to you.