Denwa Communications DW-610G User Manual page 39

Subnet Mask
IP Gateway
DNS Domain
Primary DNS
Sencondary DNS
If you uses PPPoE mode， you need to make the above setting.
PPPoE Server
User
Password
Notice:
1) Click "Apply" button after finished your setting, IP Phone will save the setting
automatically and new setting will take effect.
2) If you modify the IP address, the web will not response by the old IP address.
Your need input new IP address in the address column to logon in the phone.
3) If networks ID which is DHCP server distributed is same as network ID which is
used by LAN of system, system will use the DHCP IP to set WAN, and modify LAN's
networks ID (for example, system will change LAN IP from 192.168.10.1 to
192.168.11.1) when system uses DHCP client to get IP in startup; If system uses
DHCP client to get IP in running status and network ID is also same as LAN's,
system will refuse to accept the IP to configure WAN. So WAN's active IP will be
0.0.0.0
Input the Netmask distributed to you.
Input the Gateway address distributed to you.
Set DNS domain postfix. When the domain which you
input cannot be parsed, phone will automatically add this
domain to the end of the domain which you input before
and parse it again.
Input your primary DNS server address.
Input your standby DNS server address.
It will be provided by ISP.
Input your ADSL account.
Input your ADSL password.