Initial Connecting And Setting; Connect The Phone; Connect To Network - Denwa Communications DW-610G User Manual

2

Initial connecting and Setting

2.1

Connect the phone

2.1.1

Connect to network

Step 1: Connect the IP Phone to the corporate IP telephony network. Before you
connect the phone to the network, please check if your network can work normally.
You can do this in one of two ways, depending on how your workspace is set up.
Direct network connection—by this method, you need at least one available Ethernet
port in your workspace. Use the Ethernet cable in the package to connect WAN port
on the back of your phone to the Ethernet port in your workspace. Since this VoIP
Phone has router functionality, whether you have a broadband router or not, you can
make direct network connect. The following two figures are for your reference.
DW-610P
DW-610P
Shared network connection—Use this method if you have a single Ethernet port in
your workspace with your desktop computer already connected to it. First,
disconnect the Ethernet cable from the computer and attach it to the WAN port on
the back of your phone. Next, use the Ethernet cable in the package to connect LAN
port on the back of your phone to your desktop computer. Your IP Phone now shares
a network connection with your computer. The following figure is for your
reference.