Denwa Communications DW-610G User Manual page 67

Settings FileName is name of xml that contains the action message ）
Block Out
Settings
Set Add/Delete Limit List. Please input the prefix of those phone
numbers which you forbid the phone to dial out. For example, if you
want to forbid those phones of 001 as prefix to be dialed out, you
need input 001 in the blank of limit list, and then you cannot dial
Block out out any phone number whose prefix is 001.
X and are wildcard x means matching any single digit. For example,
4xxx expresses any number with prefix 4 which length is 4 will be
forbidden to dialed out means matching any arbitrary number digit.
For example, 6 expresses any number with prefix 6 will be forbidden
to dialed out.
Notice: Black List and Limit List can record at most10 items respectively.
8.3.4.3 DIAL PLAN
This system supports 4 dial modes:
1) End with "#": dial your desired number, and then press #.
2) Fixed Length: the phone will intersect the number according to your specified
length.
3) Time Out: After you stop dialing and waiting time out, system will send the
number collected.
4) Press # to Do Blind Transfer: input the number you want to transfer to then
press"#" you can transfer the current call to the number.
5) Blind Transfer on OnHook : input the number you want to transfer to then hang up
handle or press speaker, you can transfer the current call to the number.
6) Attend Transfer on OnHook: hang up handle or press speaker you can realize the
blind transfer function.
7) User defined: you can customize digital map rules to make dialing more flexible.
It is realized by defining the prefix of phone number and number length of dialing.
In order to keep some users' secondary dialing manner when dialing the external line
with PBX, phone can be added a special rule to realize it. so user can dial a number
as external line prefix and get the secondary dial tone to keep dial the external
number. After finishing dialing, phone will send the prefix and external number
totally to the server.
For example, there is a rule 9, xxxxxxxx in the digital map table. After dialing 9,
phone will send the secondary dial tone, user may keep going dialing. After finished,
phone will call the number which starts with 9; actually the number sent out is
9-digit with 9.