Denwa Communications DW-610G User Manual page 77

Supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP and
DHCP and Phone Flash are all deployed, endpoint will go by the following process to
try to obtain the server address and other parameters, when it boots up:
DHCP option  PnP server  Phone Flash
Field name
Auto Update Setting
Current Config
Version
Common Config
Version
CPE Serial Number
User
Password
Auto Provision
explanation
Show the current config file's version. If the version of the
configuration downloaded is higher than the version of the
running configurations, the auto provision would upgrade,
or stop here. If the endpoints confirm the configuration by
Digest method, the
configuration unless the configuration in the server is
different with the running configuration.
Show the common
configuration downloaded and the running configurations
are the same, the auto provision would stop here. If the
endpoints confirm the configuration by Digest method,
the endpoints wouldn't upgrade configuration unless the
configuration in the server is different with the running
configuration.
Show CPE Serial Number
Specify FTP/HTTP/HTTPS server Username. System will
use anonymous if username keep blank.
Specify FTP/HTTP/HTTPS server Password.
endpoints wouldn't
config file's version.
upgrade
If the