Table of Contents
Advertisement
Config Encrypt Key
Common Config
Encrypt Key
Save Autoprovision
Information
DHCP Option Setting
DHCP Option Setting
Custom DHCP Option
Plug and Play
Enable PnP
PnP Server
PnP Port
PnP Transport
PnP Interval
Phone Flash
Server Address
Config File Name
Protocol Type
Update Interval
Update Mode
TR069 Settings
Input the Encrypt Key, if the configuration file is
encrypted.
Input the Common Encrypt Key, if the Common
Configuration file is encrypted
Save the username and password authentication message
of http/https/ftp and input ID message in the phone until
the URL in the server changes
Specify DHCP Option. DHCP option supports DHCP custom
option and DHCP option 66 and DHCP option 43 to obtain
the parameters. You could choose one method among
them，the default is DHCP option disable.
A valid Custom DHCP Option is from 128 to 254. The
Custom DHCP Option must be in accordance with the one
defined in the DHCP server.
Enable PnP by selecting it, than the phone will send SIP
SUBSCRIBE messages to a multicast address when it boots
up. Any SIP server understanding that message will reply
with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request
their configuration.
Specify the PnP Server
Specify the PnP Server
Specify the PnP Transfer protocol
Specify the Interval time, unit is hour
Set FTP/TFTP/HTTP/HTTPS server IP address for auto
update. The address can be IP address or Domain name
with subdirectory.
Set configuration file's name which need to update.
System will use MAC as config file name if config file name
keep blank. For example, 000102030405.。
Specify the Protocol type FTP、TFTP or HTTP.
Specify update interval time, unit is hour.
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
Advertisement
Table of Contents
