Denwa Communications DW-610G User Manual page 42

LLDP Setting
Enable LLDP
Enable Learning
Function
Package Interval
QoS Setting
Enable DSCP
SIP DSCP
Audio RTP DSCP
WAN VLAN Setting
Enable WAN Port
VLAN
WAN Port VLAN ID
SIP 8021.p Priority
Audio 802.1p Priority
LAN VLAN Setting
LAN Port VLAN Mode
QoS&VLAN Configuration
Enable LLDP by selecting it
After enabling LLDP Learn, telephone can automatically
learn the data of DSCP, 802.1p, VLAN ID from the switch. If
the data is different from the data of the LLDP server,
telephone will change its own value as the value of the
switch（Synchronous with VLAN in switch）
The time interval of sending LLDP Packet
Enable DSCP by selecting it
Specify the value of the SIP DSCP
Specify the value of the Audio RTP DSCP
Enable WAN Port VLAN by selecting it
Specify the value of the WAN Port VLAN ID, the range of
the value is 0-4095
Specify the value of the signal 8021.p priority, the range
of the value is 0-7
Specify the value of the voice 8021.p priority, the range of
the value is 0-7
Follow WAN: Follow the WAN ID
Disable: Disable Port VALN
Enable: Enable Port VLAN and specify the Port VLAN ID
different from WAN ID