Power Adaptor Connection; Basic Initialization - Denwa Communications DW-610G User Manual

DW-610P
Step 2: Connect the handset to the handset port by the handset cable in the
package.
Step 3: connect the power supply plug to the AC 5V adapter port on the back of the
phone. Use the power cable to connect the power supply to a standard power outlet
in your workspace.
Step 4: push the on/off switch on the back of the phone to the on side, then the
phone's LCD screen displays "Initializing wait logon". Later, a ready screen typically
displays the date, time.
If your LCD screen displays different information from the above, you need refer to
the next section "Initial setting" to set your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is ready
to use.
2.1.2

Power adaptor connection

Make sure that the power you use is comply with the parameters of power adaptor.
1. Plug power adaptor to power socket.
2. Plug power adaptor's AC output to the AC5V port of DW-610G to start up.
3. There will be displayed black line and "initializing... wait logon..." on the
screen. After finishing startup, phone will show greeting, current date and time and
so forth.
4. If phone has registered to the server, you can place or answer calls.
2.2

Basic Initialization

DW-610G is provided with a plenty of functions and parameters for configuration.
User needs some network and VoIP knowledge so that user could understand the
meanings of parameters. In order to make user use the phone more easily and
convenient, there are basic configurations introduced which is mandatory to ensure
phone calls.