Denwa Communications DW-610G User Manual page 49

Field name
SIP Line
Choose line to set info about SIP, there are 4 lines to choose. You can switch by
【Load】button.
Basic Settings
Status
Server Address
Server Port
Authentication User
Authentication
Password
SIP User
Display Name
Proxy Server Address
Proxy Server Port
Proxy User
Proxy Password
Domain Realm
Backup Server Address
Backup Server Port
Enable Registration
Codecs Settings
SIP Config
explanation
Shows if the phone has been registered the SIP server or
not; or so, show Unapplied.
Input your SIP server address.
Set your SIP server port.
Input your SIP register account name.
Input your SIP register password.
Input the phone number assigned by your VoIP service
provider. Phone will not register if there is no phone
number configured.
Set the display name.
Set proxy server IP address(Usually, Register SIP Server
configuration is the same as Proxy SIP Server. But if your
VoIP service provider give different configurations
between Register SIP Server and Proxy SIP Server, you
need make different settings).
Set your Proxy SIP server port.
Input your Proxy SIP server account.
Input your Proxy SIP server password.
Set the sip domain if needed, otherwise this VoIP phone
will use the Register server address as sip domain
automatically. (Usually it is same with registered server
and proxy server IP address).
Input the Backup Server Address, if the primary server is
unavailable , then the phone will enable the Backup
Server Address
Specify the Backup Server Port
Start to register or not by selecting it or not.