Denwa Communications DW-610G User Manual page 43

LAN Port VLAN ID
8.3.2.4 Service Port
You can set the port of telnet/HTTP/RTP by this page.
Field name
Service Port
Web Server Type
HTTP Port
HTTPS Port
Telnet Port
RTP Port Range Start
RTP Port Number
Notice:
1) You need save the configuration and reboot the phone after set this page.
Specify the value of the Port VLAN ID different from WAN
ID, the range of the value is 0-4095
SERVICE PORT
explanation
Specify Web Server Type
Set web browser port, the default is 80 port，if you want
to enhance system safety，you'd better change it into
non-80 standard port；
Example: The IP address is 192.168.1.70. and the port
value is 8090, the accessing address is
http://192.168.1.70:8090
Before using the https, you must download https
authentication certification into the phone, then
set web browser port, the default is 443 port，if you want
to enhance system safety，you'd better change it into
non-443 standard port. You can access to the web in https
after rebooting the phone.
Set Telnet Port, the default is 23. You can change the
value into others.
Example: The IP address is 192.168.1.70. the telnet port
value is 8023, the accessing address is telnet 192.168.1.70
8023
Set the RTP Start Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is 200.