Denwa Communications DW-610G User Manual page 79

Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
Periodix Interval
TR069 Auto Login
"Inform" Sending
Period
8.3.6.2 Syslog Config
Syslog is a protocol which is used to record the log messages with client/server
mechanism. Syslog server receives the messages from clients, and classifies them
based on priority and type. Then these messages will be written into log by some
rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system cannot
work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can work.
Level 5---notice: Your system works well in special condition, but you need to check
its working environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info Professional debugging info from R&D person.
At present, the lowest level of debug information is info; debug level only can be
displayed on telnet.
Enable TR069 by selecting it
Specify the ACS Server Type
Specify the ACS Server URL
Specify ACS User
Specify ACS Password
It will check every 6 minutes
Enable TR069 Auto Login by selecting it
Specify the "inform" Sending Period, unit is second